Your cart is currently empty!
9mm (.356) 124gr Hybrid Hollow Point
9mm (.356) 124gr Hybrid Hollow Point
Berry’s Hybrid Hollow Points are the result of two merged developmental ideas. Following the same process as our Superior Plated Bullets®, they start with a swaged lead core that is then electroplated with copper to final weight. Lastly, they are re-struck to ensure precise specifications and create the Hybrid Hollow Point nose design. This design allows for maximum expansion and weight retention, becoming one of the most reliable self defense bullets available today. The 9mm’s penetration is 11″-13″.
**THIS IS NOT LOADED AMMUNITION**
**UNABLE TO SHIP THE PRODUCT TO THE STATE OF MASSACHUSETTS**
- Bullet O.A.L.:.538"
- Cartridge Name:9mm
- Cartridge O.A.L.:1.090"
- Recommended Velocity:1050 - 1150 fps
- Load data for our Superior Plated Bullets® can be found in any manual or on any powder manufacturer’s website.
- Cast or jacketed data with the same grain weight and profile will work with our bullets.
- You can use a taper or a roll crimp.
- Don’t over crimp the brass after seating. This causes bullet core separation, leading to increased copper fouling and accuracy issues.
- Don’t exceed the recommended maximum velocities listed. This creates bullet core separation and accuracy issues.
- Use a round nose seating stem. A flat point seating stem will alter the performance of the Hybrid Hollow Point.
SIGN UP FOR OUR NEWSLETTER
Top Rated Products
Loaded up my first batch of these 185 grn FN and really like them. They feed just fine in all my guns and have amazing accuracy, ragged holes at 7 & 15 yds. Only reloading note, I had to seat…
Getting ready to order my 2nd batch. These are great in my AK47, they are perfect for plinking and my rifle likes them. No cycle issues and having used more expensive bullets before seeing these, I can honestly say that…
I started out using the 1250 fps rated bullet and fired hundreds of rounds from my 1911 & SA-35s. I upgraded to the thick plate when I bought a PCC. The accuracy and fun factors are above reproach. Thousands of…
Don S
This is not a review but a request (suggestion). This bullet profile would be highly sought after in a 165gr 40/10mm. My personal interest would be for dual use in both the 40 S&W and the 400 Corbon
Troy South Carolina (verified owner)
Accurate and consistent. Loaded in .38 Super with 6.4 grains of Ramshot Silhouette powder. COAL was 1.240 if memory serves me right Started at 6.0 grains and worked up. Didn’t want to push too hard and no Chronograph so extrapolating data from several sources. It felt less powerful than House of Payne 124 grain jhp which is a hot load. Wish there was more load data for this bullet. Going to work up some 9mm loads for it since it has a 1150 max velocity rating. No need to use .38 Super brass for that speed. Didn’t test expansion yet .